天津正乾環保科技有限公司

News

精湛的應用水平 Professional Laser Application Level

电弧喷锌
It has the strongest practicability, fast construction speed and excellent quality.
One of the representative thermal spraying technologies

Arc spraying zinc belongs to the category of thermal spraying technology. The so-called arc spraying zinc, in short, is through zinc spraying equipment, and under the action of current, with the help of high-pressure air, the hot melt liquid zinc is high-speed projected to the coating (the coating can be steel, metal alloys, ceramics, plastics, etc.), in order to form a dense and uniform zinc layer on the surface of the coating, so as to achieve the coating. Construction method with anticorrosion, decoration or some special purpose.

Understand more

电弧喷铝
Long service life and cost saving
Less harmful to human health; strong bonding strength

Thermal spraying aluminium is a process for preparing coatings and has become one of the new technologies for metal surface protection. In the past, hot spraying aluminium technology was mainly used in the local parts of container manufacture, shipbuilding industry and important anti-corrosion parts of hydraulic engineering. With the development of China's logistics industry, large tanks have been established one after another, and hot spraying aluminium technology has been gradually applied to the inner wall protection of large storage tanks to store special materials.

Understand more

电弧喷铜
High-quality products and humanized services
Strictly comply with GB/T 19001-2008 "Quality Management System" standard requirements

Arc spraying is one of the most widely used thermal spraying methods in practical applications such as corrosion protection of steel structures, wear resistance and maintenance of mechanical parts. Arc spraying system is generally composed of special power supply, control device, arc spraying gun, wire feeder and compressed air supply system.

Understand more

喷锌铝合金
Coatings with abrasion resistance, corrosion resistance, heat insulation, conductivity, insulation, sealing, lubrication and other special mechanical physical and chemical properties

Spraying is a method of spraying on the surface of the coated object by spraying gun or dish atomizer and dispersing into uniform and fine droplets by means of pressure or centrifugal force. It can be divided into air spraying, air-free spraying, electrostatic spraying and various derivative methods of the above basic spraying forms, such as high flow and low pressure atomization spraying, thermal spraying, automatic spraying, multi-group spraying, etc.

Understand more

喷铝镁合金
Good heat dissipation, anti-electromagnetic interference and electromagnetic shielding
Magnesium alloys have high strength-to-mass ratio and certain bearing capacity.

Aluminum is the main element of Al-Mg alloy sheet, and a small amount of magnesium or other metal materials are added to strengthen its hardness. The aluminium alloy with Mg as the main additive element is also called anti-rust aluminium alloy because of its good corrosion resistance. Because it is metal itself, its thermal conductivity and strength are particularly prominent.

Understand more

喷漆加工
Preparations before spraying: 1. Selection of coating varieties, 2. Inspection of coating properties, 3. Full mixing of coatings, 4. Adjustment of coating viscosity, 5. Purification and filtration of coatings, 5. Color adjustment of coatings

A kind of artificial paint, made of cellulose nitrate, resins, pigments, solvents, etc. Usually sprayed evenly on the surface of the object with a spray gun, water-resistant, oil-resistant, fast drying, used for painting automobiles, aircraft, wood, leather and so on.

Understand more

喷砂除锈
Sandblasting and rust removal materials, namely, sandblasting abrasives, are generally divided into artificial abrasives and natural abrasives.

Sandblasting rust removal is to use compressed air as the power to form a high-speed jet beam to spray the material (garnet sand, copper ore sand, quartz sand, diamond sand, iron sand, Hainan sand) onto the surface of the workpiece to be treated at high speed, so that the appearance or shape of the workpiece surface changes.

Understand more

静电喷涂
Electrostatic spraying can be divided into pure electrostatic atomization and electrostatic atomization with additional energy.

Electrostatic spraying is a kind of coating method which uses corona discharge principle to charge negatively the atomized coating under the action of high voltage direct current electric field and adsorb it on the surface of charged positive base. Electrostatic spraying equipment consists of spraying gun, spraying cup and high voltage power supply for electrostatic spraying.

Understand more

喷不锈钢
Stainless steel is a special material. Effective measures should be taken in the production process to avoid the occurrence of corrosion conditions and inducements.

There are many kinds of surface pretreatment methods for stainless steel metal substrates, which are mainly selected according to the structure characteristics, size and output of the coatings. The main purpose of pretreatment is to remove foreign bodies on the surface of the substrate and obtain appropriate surface roughness to facilitate better adhesion of the coating. Traditional surface pretreatment methods include grinding, pickling, passivation and sand blasting.

Understand more

冷喷锌
Excellent primer, good matching;
Cold spraying zinc can conduct static electricity.

This product is a one-component zinc-rich coating with high zinc content. It is a zinc-plating coating made up of zinc powder, volatile solvent and organic resin with purity higher than 99.9%. Compared with other two-component zinc-rich coatings or other one-component products, zinc content in cold spraying zinc coatings is very high (more than 96% zinc in dry film).

Understand more

等离子喷涂
A Technology of Material Surface Strengthening and Modification
It has the properties of wear resistance, corrosion resistance, high temperature oxidation resistance, electrical insulation, heat insulation, radiation protection, wear reduction and sealing, etc.

Plasma spraying technology is a method of using plasma arc driven by direct current as heat source, heating ceramics, alloys, metals and other materials to melt or semi-melt state, and spraying at high speed to the surface of pre-treated workpiece to form a solid surface layer.

Understand more

完善的解決方案 Professional Laser Solution

  • 电弧喷锌解決方案LASER SOLUTION FOR MOBILE PHONE INDUSTRY

    With the technological progress of microelectronics industry and people's pursuit of personalization of mobile phones, fine spraying processing technology will play an increasingly important role in mobile phone manufacturing. It not only makes up for the shortcomings of traditional processing methods, but also creates considerable economic benefits for the mobile phone industry.

    Understand more

  • 电弧喷铝解決方案Arc Spraying Aluminum Solution

    Understand more

  • 电弧喷铜解決方案Solution of arc spraying copper

    Understand more

  • 喷锌铝合金解決方案Solution of Spraying Zinc Aluminum Alloy

    Understand more

  • 喷铝镁合金解決方案Solution of Spraying Aluminum and Magnesium Alloys

    Understand more

  • 喷漆加工解決方案Solution of Spray Painting Processing

    Understand more

  • 喷砂除锈解決方案Sandblasting rust removal solution

    Understand more

完善的服務 High Efficiency Service

Common problem

What problems do you encounter in the use process? Here we provide you with one-stop solutions and services.

Regular maintenance

Spraying plastic can not only prolong the service life of equipment, but also make the equipment stable and efficient production.

Rapid maintenance

Fast Maintenance A We have a perfect after-sales team and established a perfect service network.

Software upgrade

Software upgrades not only enable devices to get the latest functionality, but also improve operational stability.

Hardware transformation

Perfect hardware transformation scheme and technical support to meet customer's individualized processing needs

automation

Help customers to design automation system to achieve fast and efficient customer processing

服務網絡 Service Net

天津正乾環保科技有限公司

Tianjin ZhengQian Metal Coating Co., Ltd. is a well-known enterprise in the field of thermal spraying research and application. It integrates the design, processing and research and manufacture of various coatings, such as anticorrosive coatings, wear-resistant coatings, high-temperature coatings, conductive coatings and decorative coatings. It is a member of China Thermal Spraying Committee and China Surface Engineering. The board of directors of the association has the first-level thermal spraying qualification, and the employees are on duty after formal training and examination.

新聞資訊 News

Online Message

Contact Us

Online QQ

Top

Feedback

Dear customer friends, please give us your comments and suggestions through the following table. We will contact you as soon as possible.(all of the following are required)

Your name:
Your phone call:
Your Email:
Your address:
Message: